 |
HYPERFIN
White compound for very bright mirror finishing. Similar
to RIGEL but slightly brighter and with hardly any cut. The polish
to select if BLUE HUBBLE is too expensive. Suitable for all metals.
Sausage
pack - 25 bars per carton. |
 |
RIGEL
& RIGEL 123
White compound for mirror finishing with minimal cut.
Similar in its performance to GREEN CHROME but cheaper as it is
free of green abrasive. Best used after a perfect prepolishing operation.
Polishes all metals to high brightness when used on a soft cotton
buff. For extreme dryness and clean surface use RIGEL 123.
Sausage
pack - 25 bars per carton.
|
 |
FERROFIN
The universal finishing compound for all metals. Combining
high brightness with good cut. To achieve high brightness, use a
soft cotton buff. If cutting is required apply FERROFIN on a hard
cotton or stitched cotton buff that permits the application of high
pressure. The rate of cut will increase with higher pressure.
Comes
in premium fluted bags or large bars.
|
 |
BLUE
HUBBLE
The ultimate finishing compound, extremely bright, top of the range.
Recommended for the polishing of jewellery but also suitable for
stainless steel cutlery, kitchenware, ornamental brass and copper.
To be used on a soft loose fold cotton buff. Never use BLUE HUBBLE
on a buff that was used with a different compound before. Contamination
with another polish will always reduce brightness.
Comes
in small 130 gram bars, larger 640 gram bars or premium packaging.
|
 |
GREEN
CHROME
For mirror finishing with minimal cut. Best used after
a perfect cutting or prepolishing operation. Polishes all metals
to high brightness when used on a soft cotton buff.
Sausage
pack - 25 bars per carton
|
 |
3B
GREEN ROUGE
For mirror finishing with mild cut. Polishes all metals to mirror
brightness when used on a cotton buff. Because of its ability to cut
as well, the final result may be superior in cases where some cutting
is required. This may be the case when no cutter was used as prepolish
or when the prepolish was not used long enough or when the prepolish
left scratches behind. 18
bars per carton.
|
|
GREEN
ROUGE C and GREEN ROUGE E
For mirror finishing with little cut. Polishes all metals to extreme
brightness when used on a cotton buff. Also ideal for bright finishing
stainless steel after the use of a cutting compound. Green Rouge E
is slightly better cutting than Green Rouge C. Both
compounds come in premium fluted bags.
|
 |
POLAC
For high lustre polishing for all types of plastic. Use a soft cotton
buff. Care should be taken to avoid excessive heating as the plastic
may melt. Small diameter buffs with a low number of revolutions
reduce friction.
25
bars per carton
|
 |
MULTISHINE
The multi-purpose finishing compound. Suitable for all
metals. Also performs well as a cutter if used on a hard cotton
or sisal buff.
25 bars per carton |
|
FINISH
LQ88
Liquid version of Hyperfin.
Sold in 20 litre buckets or 200 litre drums.
|
|
LIQUID
SS - FINISH B
Similar to Finish LQ88 but with more cut.
Sold in 200 litre drums. |
